RigPix logo

Yaesu logo

Back to main

Back to Yaesu

Next HF and more

Copyright logo

Last modified 2023-09-17

Valid HTML 4.01 Transitional

Yaesu FTDX-101D

A picture of Yaesu FTdx-101D


Type:Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC and 60 m / 6 m
RX: 0.03-75 MHz
(The European version also features 4 m/70 MHz)
Tuning steps:1 / 5 / 10 Hz (SSB/CW)
10 / 100 Hz (AM/FM)
Frequency stability:0.1 ppm @ -10 to +60C (14 to 140F), after 1 minute warmup
Mode:AM / FM / SSB / CW / RTTY / PSK
Channels / memory management: 99 regular (Can be organized into 6 groups with 20 memories in each)
9 PMS pairs
Repeater shift / offset:0-1 MHz in 10 KHz steps (10 m)
0-4 MHz in 10 KHz steps (6 m)
Power supply:13.8 VDC
Current drain / power consumption:RX: Max 4 A
TX: Max 23 A
Antenna impedance / connector:50 ohm (ATU off)/ Three SO-239
HF: 16.7-150 ohm (ATU on)
6 m: 25-100 ohm (ATU on)
Dimensions (W*H*D):420*130*355 mm (16.6*5.1*12.7")
Weight:12 Kg (26.5 lb)
Other features: CTCSS/PL. Voice memory. Dimmer. RTTY and PSK encode/decode.
SD/SDHC card slot. Clock. 7-inch full color touch TFT. Twin RX.

Receiver system: Double conversion superheterodyne
1st IF: 9.005 MHz (Main) - 8.9 MHz (Sub)
2nd IF: 24 KHz (Main/Sub)
Sensitivity: AM (10 dB S+N//N. BW=6 KHz)
0.5-1.8 MHz: 6.3 uV
1.8-30 MHz: 2 uV (Amp2 on)
50-54 MHz: 1 uV (Amp2 on)
70-70.5 MHz: 2 uV (Amp2 on), Europe only
FM (12 dB SINAD. BW=12 KHz. Amp2 on)
28-30 MHz: 0.25 uV
50-54 MHz: 0.2 uV
70-70.5 MHz: 0.25 uV, Europe only
SSB/CW (10 dB S/N. BW=2.4 KHz. Amp2 on)
1.8-30 MHz: 0.16 uV)
50-54 MHz: 0.125 uV
70-70.5 MHz: 0.16 uV, Europe only
Selectivity: AM (BW=6 KHz. Width=Center)
6 KHz (-3 dB)
15 KHz (-60 dB)
FM (BW=12 KHz. Width=Center)
12 KHz (-6 dB)
25 KHz (-60 dB)
SSB (BW=2.4 KHz. Width=Center)
2.4 KHz (-3 dB)
3.6 KHz (-60 dB)
CW (BW=500 Hz)
500 Hz (-3 dB)
750 Hz (-60 dB)
Image rejection:HF: 70 dB
6 m: 60 dB
AF output power / speaker:2.5 W at 10% distortion / 4 ohm
External speaker connector:3.5 mm, 4-16 ohm

RF output power:

HF6 m4 m
AM:25 W25 W25 W
FM:100 W100 W100 W
SSB (PEP):100 W100 W100 W
CW:100 W100 W100 W
RTTY/PSK:100 W100 W100 W
Modulation system: AM: Low-level, early stage
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set):FM: 5 KHz
NFM: 2.5 KHz
Spurious emissions:HF: Better than -50 dB
6 m: Better than -63 dB
Microphone impedance / connector:200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Japan, 2019-202x
Additional info: SDR hybrid
New price 2019 in Sweden: SEK 39995:-
New price 2021 in Sweden: SEK 37995:-
Related documents: FTdx-101 series brochure (26 MB)
User manual (19 MB)
Service manual (49.3 MB)
Power device: Two RD100HHF1 in push-pull
Modifications and fixes:
Options / Accessories:
VL-1000 linear amplifier connection cable
External automatic antenna tuner
Remote control keypad
Reference microphone
Dual element microphone
Desk microphone
Ultra HiFi desk microphone
Network remote control system
External speaker
Standard hand microphone (as supplied)
VC-Tuning unit (for Sub-band)
Linear amplifier/power supply
Narrow CW filter, 300 Hz. IF: 9.005 MHz, Main band
Narrow SSB filter, 1.2 KHz. IF: 9.005 MHz, Main band
Narrow CW filter, 300 Hz. IF: 8.9 MHz, Sub band
Narrow SSB filter, 1.2 KHz. IF: 8.9 MHz, Sub band
Lightweight stereo headphones
A rear picture of Yaesu FTdx-101D