RigPix logo

Other receiver & scanner brands logo


Back to main

Back to Other RX & scanners

Next SDR


SDRplay logo


Copyright logo


Last modified 2023-05-09

Valid HTML 4.01 Transitional

SDRplay RSPdx

A picture of SDRplay RSPdx

SPECIFICATIONS

GENERAL
Type:HF/VHF/UHF 14-bit SDR receiver
Frequency range:0.001-2000 MHz
Tuning steps:Depending on software
Frequency stability:±0.5 ppm @ 0 to 35°C (32 to 95°F)
Mode:Depending on software
Channels / memory management:Depending on software
Power supply:5 VDC (via USB 2.0 port)
Current drain / power consumption:120-190 mA (Excluding bias tee)
Antenna impedance / connector:50 ohm / Two SMA jacks (1 KHz to 2 GHz)
50 ohm / BNC (1 KHz to 200 MHz)
Dimensions (W*H*D):94*35*113 mm (3.7*1.38*4.45")
Weight:315 g (11.1 oz)
Other features: 14-bit ADC. Twelve high-selectivity front end filters. Selectable FM, MW
and DAB notch filters. Three software selectable antenna ports.
Up to 10 MHz of spectrum can be monitored and recorded.
Enhanced ability to cope with strong signals. Substancially enhanced
performance below 2 MHz. HDR mode for use below 2 MHz. External
reference clock input (MCX jack). 4.7 VDC bias tee output on port B.
SDRUno software included. Other popular SDR packages are also supported.




RECEIVER SECTION
Receiver system: SDR
Sensitivity:
Selectivity:
Image rejection:
Output IQ sample rate:Up to 10.66 MPS
Output IQ bandwidth:
AF output power / speaker:No
External speaker connector:No




MISCELLANEOUS
Manufactured:England, 2019-202x
Additional info: Maximum recommended input power on the antenna
ports: 0 dBm (10 dBm for short periods)

New price, may 2023 in Sweden: SEK 2995:-
Related documents: Tech info (266 KB)
HDR mode (201 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -