| GENERAL |
| Type: | Amateur HF/VHF transceiver |
| Frequency range: |
Ham bands: 10-80 m + 2 m
Extra bands: 3.0-3.5 / 7.5-8.0 / 14.5-15.0 / 21.5-22.0 MHz
|
| Tuning steps: | Analog / continuous |
| Frequency stability: | ±? ppm |
| Mode: | TX: SSB / CW
RX: AM / SSB / CW |
| Channels / memory management: |
None
|
| Repeater shift / offset: | No |
| Power supply: | External PSU |
| Current drain / power consumption: | RX: ? mA
TX: Max ? A |
| Antenna impedance / connector: | 50-75 ohm / SO-239 |
| Dimensions (W*H*D): | 305*165*318 mm (12*6.5*12.5") |
| Weight: | 8.62 Kg (19 lb) |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (HF)
IF: 9 MHz
Double conversion superheterodyne (2 m)
1st IF: 28-30 MHz
2nd IF: 9 MHz
|
| Sensitivity: | 0.5 uV (10 dB S+N/N) |
| Selectivity: | 2.4 KHz (-6 dB)
4.2 KHz (-60 dB) |
| Image rejection: | 50 dB |
| AF output power / speaker: | 3 W at ?% distortion / 4 ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| HF | 2 m |
|---|
| SSB (PEP): | 400 W | 20 W |
| CW: | ? W | ? W |
|
| Modulation system: | |
| Max FM deviation (Factory set): | No FM |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / ?-pin (DIN) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Australia (By ACI Electronics), 1971-197x (Discontinued) |
| Additional info: |
Tube hybrid: YL1060 UHF dual tetrode
New price 1972 in Australia: $800.00 AUD + sales tax
|
| Related documents: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
?
?
?
?
|
AC power supply. 110-240 VAC. With 4 ohm speaker
DC power supply. 12 VDC
Remote VFO. Permits split QRG
IF noise blanker
|
|
