| GENERAL |
| Type: | Amateur HF transceiver |
| Frequency range: |
TX: 10-160 m + WARC
RX: 0.01-30 MHz
|
| Tuning steps: | 1 Hz |
| Frequency stability: | ±0.1 ppm @ 10 to 30°C (50 to 86°F), after 30 minute warmup |
| Mode: | AM / FM / SSB / CW |
| Channels / memory management: |
|
| Repeater shift / offset: | ±? |
| Power supply: | Mains: 90-253 VAC, 50-60 Hz |
| Current drain / power consumption: | RX: Max 20 W
TX: Max 120 W |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 260*103*260 mm (10.24*4.06*10.24") |
| Weight: | 4.5 Kg (9.92 lb) |
| Other features: |
Four + four VFO's. 5/10/15/20/25 dB attenuator. Remote control via
USB connector. Built-in 60 min audio recorder. A 10 W 2 m/70 cm option
and lots of other goodies is (were) in the pipeline
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
A/D conversion / SDR
|
| Sensitivity: |
AM (9 KHz BW):
0.57 uV (12 dB S/N)
SSB (2.4 KHz BW):
0.7 uV (10 dB S/N)
CW (500 Hz BW):
0.1 uV (10 dB S/N)
|
| Selectivity: |
AM:
3-10 KHz (In 10 steps)
FM:
6-25 KHz (In 12 steps)
SSB:
0.3-3.5 KHz (In 13 steps)
CW:
50 Hz-1.2 KHz (In 10 steps)
|
| Image rejection: | |
| AF output power / speaker: | ? W at ?% distortion / ? ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| Pwr |
|---|
| AM (PEP): | 0.1-50 W (In 16 steps) |
| FM: | 0.1-45 W (In 16 steps) |
| SSB (PEP): | 0.1-50 W (In 16 steps) |
| CW: | 0.1-45 W (In 16 steps) |
This rig delivers full power @ 100% duty cycle!
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±? KHz |
| Spurious emissions: | Better than -70 dBc |
| Microphone impedance / connector: | ? ohm / 5-pin (Prototype?), 7-pin (Production) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Switzerland, 2009-201x (Discontinued) |
| Additional info: | |
| Related documents: | User manual v1.35 (1.6 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
