RigPix logo

Kenwood/Trio logo


Back to main

Back to Kenwood/Trio

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-15

Valid HTML 4.01 Transitional

Kenwood TM-702A

A picture of Kenwood TM-702A

SPECIFICATIONS

GENERAL
Type:Amateur VHF/UHF transceiver
Frequency range: USA
TX: 144-148 / 438-450 MHz
RX: 144-148 / 438-450 MHz
Tuning steps:5 / 10 / 12.5 / 15 / 20 / 25 KHz
Frequency stability:±10 ppm @ -20 to +60°C (-4 to +140°F)
Mode:FM
Channels / memory management: 20 regular
1 call
Some memories have dual function
RAM storage with lithium battery backup
Repeater shift / offset:VHF: ±600 KHz
UHF: ±5 MHz
For other offsets, use odd split memories 17 to 20
Power supply:11.7-15.8 VDC
Current drain / power consumption:RX: Max 600 mA
TX: Max 8 A
Antenna impedance / connector:50 ohm / One SO-239 and one N-jack (On pigtails)
Dimensions (W*H*D):140*40*200 mm (5.51*1.58*7.87")
Weight:1.4 Kg (3.09 lb)
Other features:CTCSS/PL encoder. Dimmer.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 16.9 MHz (VHF) - 21.6 MHz (UHF)
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
24 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 5% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighMIdLow
2 m:25 W10 W2 W
70 cm:25 W10 W2 W
Modulation system:Reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500-600 ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 199x-199x (Discontinued)
Additional info:
Related documents: User manual (2.9 MB)
RF power module (VHF): M57737R
RF power module (UHF): M57729
Modifications and fixes:
Reviews:
Options / Accessories:
DTU-2
RC-10
RC-20
TSU-6
DTMF unit
Remote controller
Remote controller
CTCSS/PL decoder unit