RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-2SE

A picture of Icom IC-2SE

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 138-174 MHz
Italy
TX: 140-150 MHz
RX: 138-174 MHz
Tuning steps:12.5 / 100 KHz
Frequency stability:Max ? ppm
Mode:FM
Channels / memory management: 48 regular
1 call
RAM storage with lithium battery backup
Repeater shift / offset:600 KHz
Power supply:7.2-12 VDC (Depending on battery pack)
or 6-16 VDC external
Current drain / power consumption:RX: 16-210 mA
TX: Max 1.2 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):49*104*33 mm (1.93*4.09*1.3"), with BP-82
Weight:270 g (9.52 oz), with BP-82
Other features:1750 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne 1st IF: 30.875
2nd IF: 455 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:200W at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

High
@13.8 V
High
@7.2 V
Low 3
@13.8 V
Low 3
@7.2 V
Low 2Low 1
2 m:5 W2 W3.5 W2 W1.5 W500 mW
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1989-1990 (Discontinued)
Additional info:New price 1989 in Sweden: SEK 2975:-
Related documents:User manual (1.6 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
BP-81
BP-82
BP-83
BP-84
BP-85
BP-90
UT-50
UT-51
NiCd battery pack. 7.2 V, 110 mAh
NiCd battery pack. 7.2 V, 300 mAh
NiCd battery pack. 7.2 V, 600 mAh
NiCd battery pack. 7.2 V, 1000 mAh
NiCd battery pack. 12 V, 340 mAh
Battery case. Six LR6/AA batteries
CTCSS/PL tone squelch unit (Encoder/decoder)
CTCSS/PL encoder unit