RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-2GE

A picture of Icom IC-2GE

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe, general market
TX: 144-146 MHz
RX: 144-146 MHz
Italy
TX: 144-146 MHz
RX: 138-174 MHz
Tuning steps:12.5 / 25 KHz
Frequency stability:? ppm
Mode:FM
Channels / memory management: 20 regular
2 scan edges
RAM storage with lithium battery backup
Repeater shift / offset:? KHz
Power supply:5.5-16 VDC
Current drain / power consumption:RX: 10-250 mA
TX: 0.9-1.8 A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):65*130*35 mm (2.56*5.12*1.38"), with BP-3
Weight:430 g (15.17 oz), with BP-3
Other features:Splash resistant. Backlit display.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 16.9 MHz
2nd IF: 455 KHz
Sensitivity:0.25 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:400 mW at 10% distortion / 8 ohm
External speaker connector:8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:3.5-7 W1 W

NB! The High output level depends on battery pack/voltage
Modulation system:Variable reactance
Max FM deviation (Factory set):5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:2 Kohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1988-19xx (Discontinued)
Additional info:
Related documents: User manual (2.2 MB)
Service manual (11.4 MB)
Modifications:
Reviews:
Options / Accessories:
BC-26E
BP-2
BP-3
BP-4
BP-5
BP-5A
BP-7
BP-8
BP-70
HM-46L
LC-38
LC-39
LC-40
Battery charger (Europe)
NiCd battery pack. 7.2 V, 450 mAh
NiCd battery pack. 8.4 V, 270 mAh
Battery case. For six LR6 / AA dry cells or NiCd's
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 10.8 V, 450 mAh
NiCd battery pack. 13.2 V, 450 mAh
NiCd battery pack. 8.4 V, 800 mAh
NiCd battery pack. 13.2 V, 270 mAh
Speaker-microphone
Carrying case. For use with BP-2, BP-3 and BP-4
Carrying case. For use with BP-5 and BP-70
Carrying case. For use with BP-5A, BP-7 and BP-8