RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next base

Uniden logo

Copyright logo

Last modified 2021-05-02

Valid HTML 4.01 Transitional

Uniden Washington (Version 3)

A picture of Uniden Washington (Version 3)


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels/tuning steps:40
Mode:AM / SSB
Frequency control:PLL (MB8719)
Frequency stability:0.001%
Power supply:Mains: 117 VAC (Fixed power cord)
or 13.8 VDC (3-pin connector)
Current drain/power consumption:RX: 0.3-1 A @ 13.8 VDC
TX: Less than 3 A @ 13.8 VDC
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):343*127*305 mm (13.5*5*12")
Weight:6.03 Kg (13.3 lb)
Other features:PA. ANL/NB. Channel 9 button.

Receiver system:Single conversion superheterodyne
IF: 7.8 MHz
Sensitivity: AM: 0.5 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Selectivity:4.2 KHz (-6 dB), 7.9 KHz (-60 dB)
Image rejection:60 dB
AF output power/speaker:3 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm

RF output power: AM: 4 W
SSB: 12 W
Modulation system:High and low level, class B amplitude modulation
Max FM deviation:No FM
Spurious emissions:Less than -60 dB
Microphone impedance/connector:500 ohm / 5-pin (Metal locking ring connector)
Microphone input sensitivity:? mV

Manufactured:Taiwan & Philippines, 1983-199x (Discontinued)
Main PCB:PC-385 by Uniden
Additional info: This is the third Washington version, now under the Uniden trademark.
Version 1 and 2 were marketed under the President label. It's identical
to version 2 except for the new Uniden label.
New price 2000 in the US: $ 199.95
Related documents:User manual (974 KB)
Sams Photofact #:None
Modifications and fixes:
- -