RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


President logo


Copyright logo


Last modified 2023-02-23

Valid HTML 4.01 Transitional

President Richard

A picture of President Richard

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range: 26.965-27.405 MHz (Standard)
26.965-28.305 MHz (Export)
Channels / tuning steps:40 (Standard)
120 (Export)
Mode:AM / FM / SSB / CW (SQ)
Frequency control:PLL (MC145106)
Frequency stability:?%
Clarifier or Delta tune:Coarse: ? KHz
Fine: ? Hz
Power supply:10.8-15.6 VDC (3-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:ANL/NB. Tone switch. Channel 9 or 19 switch. SWR-meter.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power / speaker:2 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: Standard:
AM: 1 W
FM: 4 W
SSB: 4 W (PEP)
Export:
AM/FM: 10 W
SSB: 21 W (PEP)
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 4- or 6-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Philippines, 199x-199x (Discontinued)
Main PCB, depending on version: PB-010AB or PB-010AC by Uniden
EPT360011Z by Ranger
Sub PCBs:
Additional info:
Related documents: PLL: MC145106
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -
An inside picture of President Richard