RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next mobile

Kraco logo

Copyright logo

Last modified 2022-12-02

Valid HTML 4.01 Transitional

Kraco 4024

A picture of Kraco 4024


Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:24 (1-23 + 11A)
Mode:AM / FM
Frequency control:PLL (LC7131)
Frequency stability:? ppm
Clarifier or Delta tune:No
Power supply:13.2 VDC (2-pin connector)
Current drain / power consumption:RX: ? mA
TX: ? A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):167*51*202 mm (6.58*2.01*7.95")
Weight:1.2 Kg (2.65 lb), without mounting bracket
Other features:PA. Internal selcall option.

Receiver system: Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz
Sensitivity: AM: 0.4 uV (12 dB S/N)
FM: 0.3 uV (20 dB SINAD)
Selectivity:60 dB (Adjacent channel)
Image rejection:
AF output power / speaker:4 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm

RF output power:3.5 W
Modulation system:
Max FM deviation (Factory set):1.8 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:600 ohm / 5-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Korea, 198x-198x (Discontinued)
Main PCB:Kraco 4024 881121 by ?
Sub PCBs: K-4024 - Channel selector board
4024 - LED channel display board
Additional info:
Related documents: User manual (448 KB, in swedish)
PLL: LC7131
AF amplifier: KIA7217AP
RF driver: 2SC2036A
RF final: 2SC2075
Sams Photofact #:None
Modifications and fixes:
Options / Accessories:
- -
An inside picture of Kraco 4024
A rear picture of Kraco 4024