RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Kraco logo


Copyright logo


Last modified 2021-05-03

Valid HTML 4.01 Transitional

Kraco 2500

A picture of Kraco 2500

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels/tuning steps: 25 (1-24 + 11A)
According to swedish law at the time, SSB was only allowed on ch 24, and
therefore, switching this radio to LSB or USB automatically changed the
channel to 24.
Mode:AM/SSB
Frequency control:PLL
Frequency stability:Max ? ppm
Power supply:13.8 VDC (2-pin connector)
Current drain/power consumption:RX: ? mA
TX: ? A
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):200*53*209 mm (7.87*2.09*8.23")
Weight:1.9 Kg (4.19 lb), without mounting bracket
Other features:PA. ANL/NB. SWR-meter. Tone hi-cut. Dimmer.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:
Selectivity:
Image rejection:
AF output power/speaker:? W at ?% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: AM: ~3.5 W (5 W input)
SSB: 15 W (PEP)
Modulation system:
FM deviation:No FM
Spurious emissions:Less than -? dB
Microphone impedance/connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, 198x-198x (Discontinued)
Main PCB:YG-214294V-1
Sub PCBs:
Additional info:
Related documents:
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options/Accessories:
- -