RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Handic logo


Copyright logo


Last modified 2022-02-05

Valid HTML 4.01 Transitional

Handic 12305

A picture of Handic 12305

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:27.005-27.135 MHz
Channels / tuning steps:12 (4-15)
Mode:AM
Frequency control:XTAL-matrix
Frequency stability:?%
Clarifier or Delta tune:No
Power supply:Mains: 220 VAC (Fixed power cord)
Current drain / power consumption:RX: ? W
TX: Less than 60 W
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):415*80*230 mm (16.34*3.15*9.06")
Weight:5.3 Kg (11.68 lb)
Other features: PA. ANL. SWR-meter.
Sub receiver with one fixed channel.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.6 MHz
2nd IF: 455 KHz
Sensitivity:0.5 uV (10 dB S+N/N)
Selectivity:
Image rejection:
AF output power / speaker:3.5 W at 10% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:500 mW
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin DIN
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1975-197x (Discontinued)
Main PCB:GE-20B-5013 by GRE
Sub PCBs:
Additional info: This is the german version of the 2305. It has a mechanically
limited channel selector which is easily restored to get the full
23 channels + 11A. The output power can also be restored to
about 3.5 W.

FTZ-Nr: KF001/75
Related documents: RF driver: 2SC1728
RF final: 2SC1816
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -