RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Kraco logo


Copyright logo


Last modified 2020-08-21

Valid HTML 4.01 Transitional

Kraco 2455FM

A picture of Kraco 2455FM

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels/tuning steps:24 (1-23 + 11A)
Mode:AM/FM
Frequency control:PLL (PLL03A)
Frequency stability:Max ? ppm
Power supply:Mains: 220 VAC (Fixed power cord)
Current drain/power consumption:RX: ? W
TX: ? W
Antenna impedance/connector:50 ohm / 2*SO-239
Dimensions (W*H*D):405*150*300 mm (15.95*5.9*11.81"), without rack mounting handles
Weight:8.5 Kg (18.74 lb)
Other features:ANL/NB. PA. SWR meter. Delta tune. Dimmer.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:AM: 1 uV (10 dB S/N)
FM: 1 uV (20 dB S/N)
Selectivity:4 KHz (-5 dB)
10 KHz (-50 dB)
Image rejection:>50 dB
AF output power/speaker:2 W at 10% distortion / 8 ohms
External speaker connector:3.5 mm, 4-8 ohm




TRANSMITTER SECTION
RF output power:~3.5 W (5 W input)
Modulation system:AM: High and low level class B collector modulation
FM deviation:1.5 KHz
Spurious emissions:Less than -? dB
Microphone impedance/connector:600 ohm / 4-pin (Metal screw ring connector)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, 1982-198x (Discontinued)
Main PCB:PTBM070COX by Cybernet Enterprise Japan
Additional info:Same as Kraco 2555FM but without SSB
Related documents:
Modifications:
Reviews:
Options/Accessories:
- -