RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


Hy-Gain logo


Copyright logo


Last modified 2023-10-09

Valid HTML 4.01 Transitional

Hy-Gain I (2701)

A picture of Hy-Gain I (2701)

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz (USA)
26.965-27.255 MHz (Sweden)
Channels / tuning steps:40 (USA)
23 (Sweden)
Mode:AM
Frequency control:PLL (PLL02A)
Frequency stability:? ppm
Clarifier or Delta tune:No
Power supply:11.5-14.5 VDC (Fixed power cord)
Current drain / power consumption:RX: 300 mA (Squelched)
TX: Max 1.2 A @ 13.8 VDC
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):? mm (?")
Weight:? Kg (? lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:0.7 uV (10 dB S+N/N)
Selectivity:
Image rejection:
AF output power / speaker:3 W at ?% distortion / ? ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:Sweden: ~3.5 W (5 W input)
USA: 4 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 5-pin DIN (180°)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1976-197x (Discontinued)
Main PCB:PTBM036AOX by Cybernet Electronics Corporation
Sub PCBs:
Additional info:
Related documents:PLL: PLL02A
Sams Photofact #:CB-165 (January 1978)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Hy-Gain I (2701)