RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HT/portable


Copyright logo


Last modified 2024-03-19

Valid HTML 4.01 Transitional

Alinco DJ-160T

A picture of Alinco DJ-160T

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: USA
TX: 144-148 MHz
RX: 137-174 MHz
Tuning steps:5 / 10 / 12.5 / 20 / 25 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 20 regular
1 call
Priority function
Repeater shift / offset:±600 KHz
Power supply:7-12 VDC (Depending on battery pack)
Current drain / power consumption:RX: ? mA
TX: 900 mA @ 3 W output power
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):57*142*32 mm (2.24*5.59*1.26")
Weight:350 g (12.35 oz)
Other features: CTCSS/PL encoder. DTMF keypad and DSQ paging.
1750 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 55.05 MHz
2nd IF: 455 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:250 mW at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

High
@12V
High
@7.2V
Low
@12V
Low
@7.2V
2 m:5 W2 W500 mW200 mW
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 199x-200x (Discontinued)
Additional info:
Related documents:User manual (175 KB)
Modifications and fixes:
Reviews:
Options / Accessories:
EBC-1
EBP-10N
EBP-12N
EDC-17
EDC-18
EDC-21
EDC-22
EJ-6U
EME-4
EME-6
EME-10
EMS-2
ESC-10
Belt clip
NiCd battery pack. 7.2 V, 700 mAh
NiCd battery pack. 12 V, 700 mAh
Wall charger for 7.2 V packs (220 VAC)
Wall charger for 12 V packs (220 VAC)
Wall charger for 7.2 V packs (120 VAC)
Wall charger for 12 V packs (120 VAC)
Tone squelch unit (CTCSS/PL decoder)
Earphone-microphone
Earphone
Headset with VOX & PTT
Speaker-microphone
Soft case, for use with EBP-10N