RigPix logo

Alinco logo


Back to main

Back to Alinco

Next HT/portable


Copyright logo


Last modified 2024-03-19

Valid HTML 4.01 Transitional

Alinco DJ-162E(ED)

A picture of Alinco DJ-162E(ED)

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe
TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:5 / 10 / 12.5 / 20 / 25 KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management: 20 regular
1 call
Priority function
Repeater shift / offset:±0.99.995 MHz in 5 KHz steps
Power supply:7-12 VDC (Depending on battery pack)
Current drain / power consumption:RX: ? mA
TX: 900 mA @ 3 W output power
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):57*142*32 mm (2.24*5.59*1.26")
Weight:350 g (12.35 oz)
Other features:DTMF keypad and DSQ paging. 1750 Hz tone call.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 55.05 MHz
2nd IF: 455 KHz
Sensitivity:0.18 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:250 mW at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

High
@12V
High
@7.2V
Low
@12V
Low
@7.2V
2 m:5 W2 W500 mW200 mW
Modulation system:Variable reactance
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Additional info:
Related documents: User manual (174 KB)
Service manual (3.8 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
EBC-1
EBP-10NA
EBP-12NA
EDC-17
EDC-18
EDC-21
EDC-22
EDC-34
EDC-35
EDH-1
Belt clip
NiCd battery pack. 7.2 V, 700 mAh
NiCd battery pack. 12 V, 700 mAh
Wall charger, for EBP-10NA (220 VAC)
Wall charger, for EBP-12NA (220 VAC)
Wall charger, for EBP-10NA (120 VAC)
Wall charger, for EBP-12NA (120 VAC)
Quick charger (120 VAC)
Quick charger (220 VAC)
Dry cell case