RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next HF and more


Copyright logo


Last modified 2023-09-17

Valid HTML 4.01 Transitional

Yaesu FT-7

A picture of Yaesu FT-7

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 10-80 m in five bands
3.5-4.0 MHz (80 m)
7.0-7.5 MHz (40 m)
14.0-14.5 MHz (20 m)
21.0-21.5 MHz (15 m)
28.5-29.0 MHz (10 m), standard

NB! Optional crystals for other 10 m segments
Tuning steps:Continuous
Frequency stability: Less than 300 Hz from cold start
Less than 100 Hz over a 30 minute period after warmup
Mode:SSB / CW
Channels / memory management: 5 optional (1 per band)
XTAL controlled
Repeater shift / offset:No
Power supply:13.5 VDC 10%
Current drain / power consumption:RX: 400 mA
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):230*80*290 mm (9.06*3.15*11.42")
Weight:5 Kg (11.02 lb)
Other features:NB. 100 KHz calibrator.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 9 MHz
Sensitivity:0.25 uV (10 dB S/N)
Selectivity:2.4 KHz (-6 dB)
4 KHz (-60 dB)
Image rejection:50 dB
AF output power / speaker:3 W at 10% distortion / 4 ohm
External speaker connector:3.5 mm, 4 ohm




TRANSMITTER SECTION
RF output power:

Max pwr
SSB (PEP):10 W
CW:10 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -40 dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 197x-19xx (Discontinued)
Additional info:
Related documents:User manual (4.2 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
FP-4
FP-7
YD-844
YD-846
?
AC power supply. 13.8 VDC, 4 A
AC power supply
Desk microphone
Hand microphone
Mobile mounting bracket