RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next mobile VHF/UHF


Copyright logo


Last modified 2022-09-06

Valid HTML 4.01 Transitional

Yaesu FT-2F

A picture of Yaesu FT-2F

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-148 MHz
RX: 144-148 MHz
Tuning steps:Channelized
Frequency stability:0.001%
Mode:FM
Channels / memory management: 12 regular
XTAL controlled
Repeater shift / offset:According to XTAL:s
Power supply:13.5 VDC 10%
Current drain / power consumption:RX: Max 300 mA
TX: Max 1.7 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):168*64*254 mm (6.62*2.5*10")
Weight:1.81 Kg (4 lb)
Other features:Repeater tone (Adjustable between 1300-3000 Hz). Roger beep (AOS).




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.3 uV (20 dB S+N/N)
Selectivity:30 KHz (-6 dB), 50 KHz (-50 dB)
Image rejection:
AF output power / speaker:2.5 W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W800 mW
Modulation system:
Max FM deviation (Factory set):15 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohms / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1971-197x (Discontinued)
Additional info:New price 1971 in Australia: $269.00 AUD
Related documents:User manual (2.6 MB)
Modifications and fixes:
Reviews:
Options/Accessories:
FP-2 AC power supply