| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
Europe
TX: 144-146 MHz
RX: 144-146 MHz
USA
TX: 144-148 MHz
RX: 144-148 MHz
|
| Tuning steps: | 12.5 / 25 KHz (Europe)
5 / 10 KHz (USA) |
| Frequency stability: | ±10 ppm @ -5 to +50°C (23 to 122°F) |
| Mode: | FM |
| Channels / memory management: |
10 regular
1 scan limit pair (PMS)
RAM storage with lithium battery backup
|
| Repeater shift / offset: | ±600 KHz |
| Power supply: | 13.8 VDC ±15% |
| Current drain / power consumption: | RX: 600 mA (Squelched)
TX: Max 9 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 140*40*162 mm (5.51*1.58*6.38") |
| Weight: | 1.2 Kg (2.65 lb) |
| Other features: | 1750 tone burst (Europe), 1800 Hz (USA). |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 21.6 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.2 uV (12 dB SINAD) |
| Selectivity: | 14 KHz (-6 dB)
28 KHz (-60 dB) |
| Image rejection: | 60 dB |
| AF output power / speaker: | 2 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 4-16 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
|
| Modulation system: | Variable reactance |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 600 ohm / 8-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1985-198x (Discontinued) |
| Additional info: | |
| Related documents: | User manual (1.5 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
FTS-8
FVS-1
MF-1A3B
MH-14A8
MH-14B8
MH-15A8
MMB-26
SB-10
SP-55
STAND-1
YH-1
|
CTCSS/PL encoder/decoder unit
Voice synthesizer unit
Boom microphone with flexible arm
Hand microphone with up/down buttons
Speaker-microphone with up/down buttons
Hand microphone with DTMF keypad
Mobile mounting bracket
PTT switch unit, for MF-1A3B and YH-1
External speaker
Wire stand for desktop operation
Headset
|
|
