RigPix logo

Yaesu logo


Back to main

Back to Yaesu

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-16

Valid HTML 4.01 Transitional

Yaesu FT-2312

A picture of Yaesu FT-2312

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: TX: 1260-1300 MHz
RX: 1260-1300 MHz
Tuning steps:10 / 12.5 / 20 / 25 KHz
Frequency stability:±1.5 ppm @ -10 to +60°C (14 to 140°F)
Mode:FM
Channels / memory management: 18 regular
1 call
1 scan edge pair (PMS)
Priority function
RAM storage with lithium battery backup
Repeater shift / offset:±?
Power supply:13.8 VDC ±10%
Current drain / power consumption:RX: 500-660 mA
TX: Max 5 A
Antenna impedance / connector:50 ohm / N-jack (On pigtail)
Dimensions (W*H*D):140*40*160 mm (5.51*1.58*6.3")
Weight:1.2 Kg (2.65 lb)
Other features:AFC. ARS. CAT control. Data cloning.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 58.3 MHz
2nd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:1.5 W at 5% distortion / 8 ohm
External speaker connector:3.5 mm, 4-16 ohm




TRANSMITTER SECTION
RF output power:

HighLow
23 cm:10 W1 W
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -50 dB
Microphone impedance / connector:2 Kohm / 8-pin (Metal locking ring connector=
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1993-199x (Discontinued)
Additional info:
Related documents: RF power module: Mitsubishi M67711
Modifications and fixes:
Reviews:
Options / Accessories:
DVS-1
FTS-12
MH-14B8
MH-14D8
MMB-36
SP-55
Digital voice recording unit
CTCSS/PL unit
Hand microphone
Hand microphone
Mobile mounting bracket
External speaker