| GENERAL |
| Type: | Amateur HF/VHF transceiver |
| Frequency range: |
TX: 10-160 m + WARC / 6 m
RX: 0.5-30 / 48-54 MHz
|
| Tuning steps: | 1 / 10 / 100 Hz, 1 / 5 / 10 / 100 KHz |
| Frequency stability: | ±0.5 ppm @ 0 to 50°C (32 to 122°F) |
| Mode: | AM / FM / SSB / CW / FSK |
| Channels / memory management: |
100 regular
|
| Repeater shift / offset: | |
| Power supply: | 13.8 VDC |
| Current drain / power consumption: | RX: ? mA
TX: Max 25 A |
| Antenna impedance / connector: | 50 ohm / Two SO-239 + one SO-239 for RX only |
| Dimensions (W*H*D): | ? mm (12*5*14.75") |
| Weight: | 7 Kg (15.4 lb) |
| Other features: |
DSP. RS-232C. Built-in Ethernet and internet access. Spectrum scope.
Auto-ATU option.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Triple conversion superheterodyne
1st IF: 70 MHz
2nd IF: 455 KHz
3rd IF: 14 KHz
|
| Sensitivity: |
| AM: | <2.5 uV (10 dB S/N @ 6 KHz BW, preamp off) |
| FM: | <2.5 uV (12 dB SINAD @ 20 KHz BW, preamp off) |
| SSB: | <0.18 uV (10 dB S/N @ 2.4 KHz BW, preamp on) |
|
| Selectivity: |
| IF1: | 20 KHz @ 70 MHz |
| IF2: | 20, 6 and 2.5 KHz standard @ 455 KHz (300 and 500 Hz option) |
| IF3: | 38 DSP filters from 200 Hz to 12 KHz |
|
| Image rejection: | >70 dB |
| AF output power / speaker: | 2 W at 10% distortion / 4 ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| HF | 6 m |
|---|
| AM: | ? W | ? W |
| FM: | 100 W | 100 W |
| SSB (PEP): | 100 W | 100 W |
| CW: | 100 W | 100 W |
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | Hi-Z / 8-pin (Metal locking ring connector) |
| Microphone input level: | 1 mV RMS for full output |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 2006-20xx (Discontinued) |
| Additional info: |
New price 2006 in the US: $2550.00
|
| Related documents: | User manual v2.0 (601 KB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
