RigPix logo

Ten-Tec logo


Back to main

Back to Ten-Tec

Next HF and more


Copyright logo


Last modified 2023-10-28

Valid HTML 4.01 Transitional

Ten-Tec Delta II (536)

A picture of Ten-Tec Delta II (536)

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: TX: 10-160 m
RX: 0.1-30 MHz
Tuning steps:Down to 10 Hz
Frequency stability:? ppm
Mode:FM / SSB / CW / RTTY
Channels / memory management: 48 regular
Repeater shift / offset:No
Power supply:13.8 VDC
Current drain / power consumption:RX: 1 mA
TX: Max 20 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):248*95*356 mm (9.75*3.75*9.75")
Weight:5.64 Kg (12.43 lb)
Other features:NB. PBT. VOX.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne (SSB/CW/RTTY)
1st IF: 45 MHz
2nd IF: 6.14 MHz
Double conversion superheterodyne (FM)
1st IF: 45 MHz
2nd IF: 6.14 MHz
3rd IF: 455 KHz
Sensitivity:
Selectivity:
Image rejection:80 dB
AF output power / speaker:1.5 W at 2% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

Pwr
FM:100 W
SSB (PEP):100 W
CW:100 W
Modulation system:
Max FM deviation (Factory set):? KHz
Spurious emissions:Better than -45 dB
Microphone impedance / connector:Hi-Z / 4-pin (Metal locking ring connector)
Microphone input level:5 mV




MISCELLANEOUS
Manufactured:USA, 1991-199x (Discontinued)
Additional info:
Related documents:User manual (8.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -