RigPix logo

Ten-Tec logo


Back to main

Back to Ten-Tec

Next HF and more


Copyright logo


Last modified 2023-10-31

Valid HTML 4.01 Transitional

Ten-Tec Argonaut (515)

A picture of Ten-Tec Argonaut 515

SPECIFICATIONS

GENERAL
Type:Amateur HF transceiver
Frequency range: 10-80 m in eight bands
80 m:   3.5-4.0 MHz
40 m:   7.0-7.5 MHz
20 m:   14.0-14.5 MHz
15 m:   21.0-21.5 MHz
10 m A:   28.0-28.5 MHz
10 m B:   28.5-29.0 MHz
10 m C:   29.0-29.5 MHz (Optional)
10 m D:   29.5-30.0 MHz (Optional)
Tuning steps:Analog / continuous
Frequency stability:±? ppm
Mode:SSB / CW
Channels / memory management: None
Repeater shift / offset:No
Power supply:12-14 VDC
Current drain / power consumption:RX: ? mA
TX: Max 1 A
Antenna impedance / connector:50-75 ohm / Phono (RCA)
Dimensions (W*H*D):330*114*190 mm (13*4.5*7.5")
Weight:2.72 Kg (6 lb)
Other features:




RECEIVER SECTION
Receiver system: ? conversion superheterodyne
Sensitivity:0.35 uV (10 dB S+N/N)
Selectivity:2.4 KHz (-6 dB)
Image rejection:
AF output power / speaker:1 W at 2% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

Pwr
SSB (PEP):3 W
CW:3 W
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -? dB
Microphone impedance / connector:Hi-Z / ?-pin (1/4" jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:USA, 1980-198x (Discontinued)
Additional info:
Related documents:User manual (2.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A rear picture of Ten-Tec Argonaut 515