RigPix logo

Standard logo


Back to main

Back to Standard

Next mobile VHF/UHF


Copyright logo


Last modified 2023-10-02

Valid HTML 4.01 Transitional

Standard C-6000

A picture of Standard C-6000

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: TX: 430-440 / 1260-1300 MHz
RX: 430-440 / 1260-1300 MHz
Tuning steps:? KHz
Frequency stability:±? ppm
Mode:FM
Channels / memory management:
Repeater shift / offset:±?
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: Max 900 mA
TX: 1.5-4.5 A
Antenna impedance / connector:50 ohm / Two N-jacks (On pigtails)
Dimensions (W*H*D):155*55*207 mm (6.1*2.16*8.15")
Weight:1.8 Kg (3.97 lb)
Other features:Twin RX.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne (70 cm)
1st IF: 21.8 MHz
2nd IF: 455 KHz
Triple conversion superheterodyne (23 cm)
1st IF: 157.0 MHz
2nd IF: 45.0 MHz
3rd IF: 455 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:12 KHz (-6 dB)
24 KHz (-60 dB)
Image rejection:
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
70 cm:10 W1 W
23 cm:10 W1 W
Modulation system:
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1986-198x (Discontinued)
Additional info:
Related documents: 70 cm RF module: M57752
23 cm RF module: M57762
Modifications and fixes:
Reviews:
Options / Accessories:
- -
A side view picture of Standard C-6000
A rear picture of Standard C-6000