RigPix logo

Standard logo


Back to main

Back to Standard

Next HT/portable


Copyright logo


Last modified 2024-09-14

Valid HTML 4.01 Transitional

Standard C-156

A picture of Standard C-156

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Europe and Asia
TX: 144-146 MHz
RX: 136-160 MHz
USA
TX: 144-148 MHz
RX: 136-160 MHz
Tuning steps:? KHz
Frequency stability:0.0001% @ -10 to +60°C (14 to 140°F)
Mode:FM
Channels / memory management: 100 regular with alpha tags
RAM storage with lithium battery backup
Repeater shift / offset:±?
Power supply:4.5-9.6 VDC (Batteries)
or 4.5-16 VDC (External)
Current drain / power consumption:RX: ? mA
TX: Max ? A
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):58*100*26 mm (2.28*3.94*1.02"), without battery
Weight:210 g (7.41 oz), without battery
Other features:CTCSS/PL encoder. DTMF with paging.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.8 MHz
2nd IF: 450 KHz
Sensitivity:0.16 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power / speaker:250 mW at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:

HighLow
2 m:1.8-5 W350 mW

NB! The high output level depends on voltage / battery pack.
Modulation system:
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / ?-pin
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1996-199x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
CBT-156
CNB-156
CNB-157
CTN-115
Battery case (Four AA alkaline or rechargeable batteries)
NiCD battery pack. 6 V, 600 mAh
NiCD battery pack. 9.6 V, 600 mAh
Tone squelch unit (CTCSS/PL decoder)