RigPix logo

Standard logo


Back to main

Back to Standard

Next HT/portable


Copyright logo


Last modified 2023-10-02

Valid HTML 4.01 Transitional

Standard C-110

A picture of Standard C-110

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range
depending on version:
Type W
TX: 144-146 MHz
RX: 144-146 MHz
Type E
TX: 144-148 MHz
RX: 144-148 MHz
Tuning steps:10 / 100 KHz, 1 MHz (Thumbwheels) plus a 5 KHz button
Frequency stability:±? ppm
Mode:FM
Channels / memory management:None
Repeater shift / offset:±600 KHz
Power supply:7-10 VDC (Depending on battery pack)
or 5.5-11 VDC external
Current drain / power consumption:RX: 20 mA (Squelched)
TX: 750 mA @ 9 VDC
Antenna impedance / connector:50 ohm / BNC
Dimensions (W*H*D):65*167*34 mm (2.56*6.58*1.34")
Weight:470 g (1.04 lb), with batteries and antenna
Other features:S/battery meter. 1750 Hz repeater tone.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:14 KHz (-6 dB)
Image rejection:
AF output power / speaker:300 mW at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:2-2.5 W150 mW

The high power setting depends on voltage / battery pack.
Modulation system:Reactance modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / ?-conductor (2.5 mm)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1983-198x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
CNB-110
?
NiCd battery pack
Battery case (Six LR6 / AA batteries)