| GENERAL |
| Type: | Experimental/development SDR RF board |
| Frequency range: | 325-3800 MHz (70-6000 MHz after simple modification) |
| Frequency stability: | ±25 ppm @ 10 to 40°C (50 to 104°F) |
| RF bandwidth: | 20 MHz (56 MHz after modification) |
| Power supply: | 4.5 to 5.5 VDC, supplied via USB |
| Current drain / power consumption: | ? mA |
| Antenna impedance / connector: | 50 ohm / Two SMA jacks |
| Dimensions (W*H*D): | 79*117*24 mm (3.11*4.6*0.94") |
| Weight: | 114 g (4.02 oz) |
| Other features: | |
|
|
|
|
| HARDWARE SECTION |
| Chipset: | AD9363 |
| Sample rate: | 65.2 KSPS to 61.44 MSPS |
| Sample depth: | 12 bit |
| TX channels: | 1 |
| Max TX power: | 5 mW (7 dBm) |
| RX channels: | 1 |
| Oscillator precision: | ±25 ppm |
| Duplex: | Half or full |
| Interface: | USB 2.0 |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 2017-202x |
| Additional info: |
Some have managed to make the Pluto transmit at as low as 46 MHz
after modification. However, the output power is very low at this end.
|
| Related documents: | Highlights (422 KB) |
| Modifications and fixes: | Frequency expansion (97 KB) |
| Reviews: | |
| Options / Accessories: |
|
