RigPix logo

Professional transceivers logo


Back to main

Back to Professional transceivers

Next land mobile


Yaesu logo


Copyright logo


Last modified 2025-09-13

Valid HTML 4.01 Transitional

Yaesu FTC-2040

A picture of Yaesu FTC-2040

SPECIFICATIONS

GENERAL
Type:Professional land mobile transceiver
Frequency range:134-174 MHz (Any 1.5 MHz segment according to alignment)
Tuning steps:Channelized
Frequency stability:TX: ±0.0005%
RX: ±0.001%
Mode:FM
Channels / memory management: 12 regular
XTAL controlled
Duplex shift / offset:According to XTALs
Power supply:13.6 VDC
Current drain / power consumption:RX: 270-500 mA
TX: Max 7.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):180*72*269 mm (7.09*2.84*10.6")
Weight:2.8 Kg (6.17 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: ? KHz
Sensitivity:0.3 uV (20 dB noise quieting)
Squelch sensitivity:
Selectivity:-70 dB (Adjacent channel)
Image rejection:80 dB
AF output power/speaker:1.5 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power: 40 W
Modulation system:Phase modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -70 dB
Microphone impedance / connector:600 ohm / 6-pin (Male locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1980-198x (Discontinued)
Additional info:
Related documents:
Modifications:
Reviews:
Options / Accessories:
?
?
?
CTCSS/PL unit
2-tone decoder
Horn relay