| GENERAL |
| Type: | Professional land mobile UHF transceiver |
| Frequency range: |
TX: 370-420 MHz (Any 5.5 MHz segment *)
RX: 370-420 MHz (Any 3 MHz segment *)
* With no degradation, according to alignment
|
| Tuning steps: | Channelized. Designed for 25 KHz channel spacing. |
| Frequency stability: | ±5 ppm @ -30 to +60°C (-22 to +140°F) |
| Mode: | FM |
| Channels / memory management: |
1 to 6 channel versions
Two XTALs per channel
12 to 99 channel versions (Model S suffix = Synthesizer)
Up to 99 regular (Varies depending on version)
PLL control
|
| Duplex shift / offset: |
XTAL versions: Depending on XTALs
PLL versions: Programmable
|
| Power supply: | 13.2 VDC (Edge connector) |
| Current drain / power consumption: | RX: 130 mA (Squelched)
TX: 5 A |
| Antenna impedance / connector: | 50 ohm / ? |
| Dimensions (W*H*D): | 177*60*180 mm (6.97*2.36*7.09") |
| Weight: | 1.82 Kg (4.01 lb) |
| Other features: | Depending on selected options. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.3 uV (12 dB SINAD) |
| Squelch sensitivity: | |
| Selectivity: | 80 dB (Adjacent channel) |
| Image rejection: | |
| AF output power / speaker: | 2 W at 1.5% distortion / ? ohm |
| External speaker connector: | ?-pin (Edge connector) |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
20 W
|
| Modulation system: | Phase modulation |
| Max AM modulation (Factory set): | No AM |
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 8-pin (Edge connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | 1979-1985 (Discontinued) |
| Additional info: | |
| Related documents: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
