| GENERAL |
| Type: | Professional land mobile transceiver |
Frequency range
depending on version: |
E: 146-174 MHz
E2: 136-150 MHz
|
| Tuning steps: | Channelized (Programmable in 12.5 / 20 / 25 KHz increments) |
| Frequency stability: | ? ppm |
| Mode: | FM / NFM |
| Channels / memory management: |
2 regular
|
| Repeater shift / offset: | Programmable |
| Power supply: | 13.2 VDC |
| Current drain / power consumption: | RX: 0.5-1 A
TX: Max 7.5 A |
| Antenna impedance / connector: | 50 ohm / BNC (On pigtail) |
| Dimensions (W*H*D): | 140*40*169 mm (5.51*1.58*6.68") |
| Weight: | ? g (? lb) |
| Other features: | QT & DQT (CTCSS/PL & DCS). 5-tone selcall. DTMF TX. |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
? conversion superheterodyne
1st IF: 45.05 MHz
2nd IF: 455 KHz
|
| Sensitivity: | 0.25 uV (12 dB SINAD) |
| Squelch sensitivity: | |
| Selectivity: | |
| Image rejection: | 80 dB |
| AF output power / speaker: | 4 W at 10% distortion / 4 ohm |
| External speaker connector: | |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
Max 25 W
|
| Modulation system: | |
| Max FM deviation (Factory set): | FM: ±4 or ±5 KHz
NFM: ±2.5 KHz |
| Spurious emissions: | Better than -70 dB |
| Microphone impedance / connector: | ? ohm / 6-pin (Modular) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 1996-199x (Discontinued) |
| Additional info: |
Can also be programmed for 2 m ham band.
|
| Related documents: |
Service manual (37.4 MB)
FM-IF: MC3371D
|
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
