RigPix logo

Professional transceivers logo


Back to main

Back to Professional transceivers

Next land mobile


Copyright logo


Last modified 2019-06-07

Valid HTML 4.01 Transitional

Icom IC-V200T

A picture of Icom IC-V200T

SPECIFICATIONS

GENERAL
Type:Professional land mobile transceiver
Frequency range
depending on version:
68-88 MHz
146-174 MHz
Tuning steps:Channelized
Frequency stability:? ppm
Mode:FM
Channels/memory management:? regular
Repeater shift/offset:Depending on programming
Power supply:13.2 VDC ±15%
Current drain/power consumption:RX: 0.35-1 A
TX: Max 4 A (10 W), Max 7 A (25 W)
Antenna impedance/connector:50 ohm / SO-239 on pigtail
Dimensions (W*H*D):140*50*191 mm (5.51*1.97*7.52")
Weight:1.5 Kg (3.31 lbs)
Other features:5-tone CCIR and ZVEI selcall.




RECEIVER SECTION
Receiver system:Double conversion superheterodyne
1st IF: 21.8 MHz
2nd IF: 455 KHz
Sensitivity:0.55 uV (12 dB SINAD)
Selectivity:
Image rejection:
AF output power/speaker:3 W at ?% distortion / 4 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power<>depending on version: 10 or 25 W
Modulation system:Variable reactance frequency modulation
FM deviation
depending on version:
±2.5 KHz
±4 KHz
±5 KHz
Spurious emissions:Less than -70 dB
Microphone impedance/connector:600 ohm / ?-pin




MISCELLANEOUS
Manufactured:Japan, 198x-199x (Discontinued)
Additional info:
Related documents: User manual (2.2 MB)
Service manual, VHF Low (17.8 MB)
Service manual, VHF High (17.4 MB)
Modifications:
Reviews:
Options/Accessories:
- -