| GENERAL |
| Type: | Amateur VHF transceiver |
| Frequency range: |
TX: 144-146 MHz
RX: 144-146 MHz
|
| Tuning steps: |
FM: 1 KHz and 100 Hz
SSB: 10 / 1 KHz
|
| Frequency stability: | ±? ppm |
| Mode: | FM / SSB |
| Channels / memory management: |
6 regular
RAM storage with external backup voltage (6-9 VDC)
|
| Repeater shift / offset: | |
| Power supply: | 13.8 VDC (2-pin connector) |
| Current drain / power consumption: | RX: ? mA
TX: Max 3 A |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 178*73*250 mm (7*2.87*9.84") |
| Weight: | 2.8 Kg (6.17 lb) |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Single conversion superheterodyne (SSB)
IF: 10.6935
Double conversion superheterodyne (FM)
1st IF: 10.695
2nd IF: 455 KHz
|
| Sensitivity: |
FM: 0.5 dB (20 dB noise quieting
SSB: 0.25 uV (10 dB S/N)
|
| Selectivity: |
FM
10 KHz (-6 dB)
20 KHz (-60 dB)
SSB
2.2 KHz (-6 dB)
6 KHz (-60 dB)
|
| Image rejection: | |
| AF output power / speaker: | 1.5 W at 10% distortion / 8 ohm |
| External speaker connector: | 3.5 mm, 8 ohm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| High | Low |
|---|
| FM: | 10 W | 1 W |
| SSB (PEP): | 10 W | 1 W |
|
| Modulation system: |
FM: Variable reactance
SSB: Balanced
|
| Max FM deviation (Factory set): | ±5 KHz |
| Spurious emissions: | Better than -60 dB |
| Microphone impedance / connector: | 600 ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Japan, 19xx-19xx (Discontinued) |
| Additional info: | |
| Related documents: | |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
