RigPix logo

Other receiver & scanner brands logo

Back to main

Back to Other RX & scanners

Next SDR

SDRplay logo

Copyright logo

Last modified 2023-12-30

Valid HTML 4.01 Transitional

SDRplay RSP2pro

A picture of SDRplay RSP2pro


Type:HF/VHF/UHF SDR receiver
Frequency range: 0.001-2000 MHz
Tuning steps:Depending on software
Frequency stability:? ppm
Mode:Depending on software
Channels / memory management:Depending on software
Power supply:5 VDC (Via USB 2.0 port)
Current drain / power consumption:170 mA typical (Excl bias T)
Antenna impedance / connector:50 ohm / Two SMA
Hi-Z / Pluggable screw terminals
Dimensions (W*H*D):98*32*86 mm (3.86*1.26*3.39")
Weight:112 g (3.95 oz)
Other features: Ten high-selectivity front end filters.
Up to 10 MHz of spectrum can be monitored!
SDRUno software included. Other popular SDR
packages are also supported.

Receiver system:
Image rejection:
Output IQ sample rate:Up to 10.66 MSPS
Output IQ bandwidth:
AF output power / speaker:No
External speaker connector:No

Manufactured:England, 2016-201x (Discontinued)
Additional info: This is basically the same SDR as RSP2 but
with a metal case for better shielding
Related documents:Tech info (438 KB)
Modifications and fixes:
Options / Accessories:
- -