RigPix logo

Kenwood/Trio logo

Back to main

Back to Kenwood/Trio

Next HT/portable

Copyright logo

Last modified 2023-09-14

Valid HTML 4.01 Transitional

Kenwood TR-3200

A picture of Kenwood TR-3200
The threaded whip socket has been replaced by a BNC jack on this one


Type:Amateur VHF transceiver
Frequency range: TX: 430-440 MHz
RX: 430-440 MHz
Tuning steps:Channelized
Frequency stability:? ppm
Channels / memory management:12 regular (Two XTALs per channel)
Repeater shift / offset:According to XTALs
Power supply:9.6-15.6 VDC (Ten R6/AA NiCd batteries)
or 9.6-15.6 VDC external (3-pin connector)
Current drain / power consumption:RX: 50 mA (Squelched)
TX: 550-750 mA @ 13 VDC
Antenna impedance / connector:50 ohm / SO-239 on the back or threaded whip socket on the front
Dimensions (W*H*D):135*58*191 mm (5.32*2.28*7.52")
Weight:1.6 Kg (3.53 lb), with batteries
Other features:1750 Hz tone call.

Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (20 dB S/N)
Selectivity:16 KHz (-6 dB)
32 KHz (-60 dB)
Image rejection:
AF output power / speaker:700 mW at 10% distortion / 8 ohm
External speaker connector:3.5 mm

RF output power:

70 cm:2 W400 mW
Modulation system:Variable reactance phase modulation
Max FM deviation (Factory set):5 KHz (Max 7.5 KHz)
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Japan, 197x-197x (Discontinued)
Additional info:New price 1976 in Sweden: SEK 1950:-
Related documents: User manual (2.7 MB)
Service manual (5.8 MB)
Modifications and fixes:
Options / Accessories:
BC-1 Wall charger
A rear picture of Kenwood TR-3200