RigPix logo

Kenwood/Trio logo

Back to main

Back to Kenwood/Trio

Next HT/portable

Copyright logo

Last modified 2023-09-14

Valid HTML 4.01 Transitional

Kenwood / Trio TR-2200

A picture of Trio TR-2200
The Trio branded version on this picture has had its telescopic whip replaced by a red 1750 Hz tone call button


Type:Amateur VHF transceiver
Frequency range: TX: 144-146 MHz
RX: 144-146 MHz
Tuning steps:Channelized
Frequency stability:? ppm
Channels / memory management:6 regular (Two XTALs per channel)
Repeater shift / offset:According to XTALs
Power supply:Mains: 100 VAC (Trio version, for Japan only)
or 10.5-15.5 VDC (Barrel connector)
Current drain / power consumption:RX: 38 mA
TX: 420 mA
Antenna impedance / connector:50 ohm / SO-239 and built-in telescopic whip
Dimensions (W*H*D):135*58*181 mm (5.32*2.28*7.13")
Weight:1.7 Kg (3.75 lb), with batteries and microphone
Other features:

Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (20 dB S/N)
Selectivity:10 KHz (-6 dB)
Image rejection:
AF output power / speaker:500 mW at 10% distortion / ? ohm
External speaker connector:

RF output power:1 W
Modulation system:Reactance phase shift
Max FM deviation (Factory set):5 KHz (Max 15 KHz)
Spurious emissions:Better than -? dB
Microphone impedance / connector:500 ohm / 3-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:Japan, 1970-197x (Discontinued)
Additional info:See also Drake TR-22
Related documents:User manual (4.3 MB)
Modifications and fixes:
Options / Accessories:
- -