RigPix logo

Icom logo

Back to main

Back to Icom

Next HF and more

Copyright logo

Last modified 2023-09-19

Valid HTML 4.01 Transitional

Icom IC-710

A picture of Icom IC-710


Type:Amateur HF transceiver
Frequency range: Japanese domestic market
TX: 10-160 m
RX: 10-160 m
Tuning steps:100 Hz / 10 KHz
Frequency stability: Less than 500 Hz after power on
Less than 100 Hz after 60 minutes
Mode:SSB / CW / RTTY
Channels/memory management:None
Repeater shift/offset:No
Power supply:13.6 VDC 15%
Current drain / power consumption:RX: ? mA
TX: Max 18 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):241*111*311 mm (9.5*4.4*12.2")
Weight:7.3 Kg (16.1 lb)
Other features:PBT, NB, VOX, transverter jack, IF output jack. SWR-meter.

Receiver system: Triple conversion superheterodyne
1st IF: 9.0115 MHz
2nd IF: 10.75 MHz
3rd IF: 9.0115 MHz
Sensitivity:0.25 uV (10 dB S+N/N)
Selectivity: SSB/RTTY
2.4 KHz (-6 dB)
4 KHz (-60 dB)
500 Hz (-6 dB)
1.4 KHz (-60 dB)
CW-N (Optional)
200 Hz (-6 dB)
1 KHz -60 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm

RF output power: 0-100 W adjustable
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:~10 mV (Typical)

Manufactured:Japan, 197x-197x (Discontinued)
Additional info: See also: IC-701 (General market version)
Related documents:
Modifications and fixes:
Options / Accessories:
Computerized remote controller
Electret desk microphone