RigPix logo

Icom logo


Back to main

Back to Icom

Next base VHF/UHF


Copyright logo


Last modified 2023-09-19

Valid HTML 4.01 Transitional

Icom IC-71

A picture of Icom IC-71

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: Japanese domestic market
TX: 50-54 MHz
RX: 50-54 MHz
Tuning steps:Analog / continuous
Frequency stability:? ppm
Mode:AM / FM / CW
Channels / memory management:None
Repeater shift / offset:No
Power supply:12-14 VDC (Mains option)
Current drain / power consumption:RX: 500 mA (Average)
TX: 2 to 3 A
Antenna impedance / connector:50-75 ohm / SO-239
Dimensions (W*H*D):230*110*260 mm (9.06*4.33*10.24")
Weight:5.3 Kg (11.68 lb)
Other features:SWR-meter.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: ~12 MHz
2nd IF: 455 KHz
Sensitivity:
Selectivity:FM: 16 KHz (-6 dB)
CW: 4 KHz (-6 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power: Max 10 W
Modulation system:
Max FM deviation (Factory set):? KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 3-pin (Metal locking ring connector)
Microphone input sensitivity:? mV




MISCELLANEOUS
Manufactured:Japan, 1970-197x (Dicontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
IC-71PS Bolt-on PSU. 100 VAC in. 13.5 VDC, 4.5 A peak out
An inside picture from the top of Icom IC-71
An inside picture from the bottom of Icom IC-71