RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-45A

A picture of Icom IC-45A

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: USA
TX: 440-450 MHz
RX: 440-450 MHz
Tuning steps:5 / 25 KHz
Frequency stability:±0.001% @ -10 to +60°C (14 to 140°F)
Mode:FM
Channels / memory management: 5 regular
1 priority
RAM storage, no internal backup battery
Repeater shift / offset:±0.1-9.9 MHz in 100 KHz increments
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 500-700 mA
TX: 1.7-3.5 A
Antenna impedance / connector:50 ohm / N-jack
Dimensions (W*H*D):140*50*177 mm (5.51*1.97*6.97")
Weight:1.5 Kg (3.31 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.8 MHz
2nd IF: 455 KHz
Sensitivity:0.3 uV (12 dB SINAD)
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:>60 dB
AF output power / speaker:2 W at ?% distortion / ? ohm
External speaker connector:3.5 mm, 4-8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
70 cm:10 W1 W
Modulation system:Variable reactance frequency modulation
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1983-198x (Discontinued)
Additional info:
Related documents:User manual (3.7 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
HM-14
HM-15
Hand microphone with DTMF pad
Hand microphone with 1750 Hz tone call