RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-370

A picture of Icom IC-370

SPECIFICATIONS

GENERAL
Type:Amateur UHF transceiver
Frequency range: Japanese domestic market
TX: 432.00-439.80 MHz
RX: 432.00-439.80 MHz
Tuning steps:20 KHz
Frequency stability:0.001% @ -10 to +60C (14 to 140F)
Mode:FM
Channels / memory management: 4 regular
RAM storage
Repeater shift / offset:No
Power supply:13.8 VDC 15%
Current drain / power consumption:RX: 450-630 mA
TX: 1.6 to 3.5 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):156*58*228 mm (6.14*2.28*8.98")
Weight:2.2 Kg (4.85 lb)
Other features:Detachable front panel.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 21.4 MHz
2nd IF: 455 KHz
Sensitivity:0.6 uV (20 dB noise quieting)
Selectivity:30 KHz (-6 dB)
60 KHz (-60 dB)
Image rejection:
AF output power / speaker:2 W at 10% distortion / 8 ohm
External speaker connector:3.5 mm




TRANSMITTER SECTION
RF output power:

HighLow
70 cm:10 W1 W
Modulation system:
Max FM deviation (Factory set):12 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:600 ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 19xx-19xx (Discontinued)
Additional info: This transceiver is wideband, using twice (30 KHz) the bandwidth compared
to the more traditional 15 KHz used for decades on VHF/UHF ham bands. The
audio quality is probably amazing between two equal units.
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
BC-10
IC-HM5
IC-SM2
?
?
Memory backup AC power supply
Hand microphone
Desk microphone
Memory backup DC power cord
Separation kit