RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2023-09-18

Valid HTML 4.01 Transitional

Icom IC-22A

A picture of Icom IC-22A

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 144-148 MHz
RX: 144-148 MHz
Tuning steps:Channelized
Frequency stability:? ppm
Mode:FM
Channels / memory management: 22 regular
Two XTALs per channel
Repeater shift / offset:According to XTALs
Power supply:13.8 VDC ±15% (Fixed power cord)
Current drain / power consumption:RX: 180 mA (Average)
TX: 1.2 to 2.1 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):156*58*205 mm (6.14*2.28*8.07")
Weight:1.7 Kg (3.75 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:0.4 uV (20 dB quieting)
Selectivity:16 KHz (-6 dB)
30 KHz (-50 dB)
Image rejection:
AF output power / speaker:1.5 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power:

HighLow
2 m:10 W1 W
Modulation system:Variable reactance phase modulation
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500 ohm / 3-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1975-197x (Discontinued)
Additional info:
Related documents:User manual (7.1 MB)
Modifications:
Reviews:
Options / Accessories:
- -
A rear picture of Icom IC-22A