RigPix logo

Icom logo


Back to main

Back to Icom

Next HT/portable


Copyright logo


Last modified 2026-07-18

Valid HTML 4.01 Transitional

Icom IC-215

A picture of Icom IC-215

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range: TX: 146-148 MHz
RX: 146-148 MHz
Tuning steps:Channelized
Frequency stability:Max ? ppm
Mode:FM
Channels / memory management: 15 regular
XTAL controlled
Repeater shift / offset:Depending on XTALs
Power supply:13.8 VDC ±15%
Current drain / power consumption:RX: 55-270 mA
TX: 350-750 mA
Antenna impedance / connector:50 ohm / SO-239 or built-in telescopic whip
Dimensions (W*H*D):61*183*162 mm (2.4*7.2*6.38")
Weight:1.9 Kg (4.19 lb), with batteries
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 10.7 MHz
2nd IF: 455 KHz
Sensitivity:
Squelch sensitivity:
Noise figure:
Selectivity:15 KHz (-6 dB)
30 KHz (-60 dB)
Image rejection:
AF output power / speaker:1 W at 10% distortion / 8 ohm
External speaker connector:TS "Minijack" (3.5 mm)




TRANSMITTER SECTION
RF output power:

HighLow
2 m:3 W500 mW
Modulation system:Variable reactance phase modulation
Max AM modulation (Factory set):No AM
Max FM deviation (Factory set):±5 KHz
Spurious emissions:Better than -60 dB
Microphone impedance / connector:500-600 ohm / 4-pin (Male GX16 locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1977-19xx (Discontinued)
Additional info:
Related documents: User manual (1.6 MB)
Modifications and fixes:
Reviews:
Options / Accessories:
IC-3PS
IC-20L
AC power supply
Linear amplifier. 10 W