RigPix logo

Icom logo


Back to main

Back to Icom

Next mobile VHF/UHF


Copyright logo


Last modified 2026-07-18

Valid HTML 4.01 Transitional

Icom AM-3D

A picture of Icom AM-3D

SPECIFICATIONS

GENERAL
Type:Amateur VHF transceiver
Frequency range:50-54 MHz (6 m)
Tuning steps:Analog / continuous
Frequency stability:?%
Mode:AM / FM
Channels / memory management: 1 regular
XTAL controlled
Repeater shift / offset:
Power supply:13.5 VDC (Nine LR20 / D batteries)
or 13.5 VDC external (Male barrel jack, center negative)
Current drain / power consumption:RX: 30-200 mA
TX: Max 800 mA
Antenna impedance / connector:75 ohm / SO-239 or built-in telescopic whip
Dimensions (W*H*D):202*70*185 mm (7.95*2.76*7.28")
Weight:3.7 Kg (8.16 lb), with batteries
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 5.4175 MHz
2nd IF: 455 KHz
Sensitivity:1 uV (10 dB S/N)
Squelch sensitivity:
Noise figure:
Selectivity:8 KHz (-6 dB)
Image rejection:
AF output power / speaker:1 W at ?% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power: 1 W
Modulation system:
Max AM modulation (Factory set):?%
Max FM deviation (Factory set):±? KHz
Spurious emissions:Better than -60 dB
Microphone impedance/connector:10 Kohm / 3-pin (Male GX16 locking ring jack)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1971-197x (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
- -