RigPix logo

Harvey-Wells logo


Back to main

Back to Harvey-Wells

Next receiver


Copyright logo


Last modified 2023-06-15

Valid HTML 4.01 Transitional

Harvey-Wells R-9

A picture of Harvey-Wells R-9
This picture is a slightly inconsistant artwork where 10 & 11 m correctly shares the
same frequency dial while the bandswitch shows separate band positions instead
of the letters A to E. The dial should also indicate letters A to E instead of meters.

SPECIFICATIONS

GENERAL
Type:Amateur HF receiver
Frequency range: 10-80 m in five bands
A:   26.96-30.0 MHz
B:   21.0-21.45 MHz
C:   14.0-14.4 MHz
D:   7.0-7.3 MHz
E:   3.5-4.0 MHz
Tuning steps:Analog / continuous
Frequency stability:? ppm
Mode:AM / CW
Channels / memory management: None
Power supply:Mains: 100 / 120 VAC
Current drain / power consumption:Less than 70 W
Antenna impedance / connector:50-75 ohm / Phono (RCA)
Dimensions (W*H*D):314*171*267 mm (12.38*6.75*10.5")
Weight:8.2 Kg (18 lb)
Other features:




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 1.6 MHz
2nd IF: 260 KHz
Sensitivity:
Selectivity:4 KHz (-6 dB)
Image rejection:25 dB
AF output power / speaker:5 W at ?% distortion / No internal speaker
External speaker connector:?, 3.2 ohm




MISCELLANEOUS
Manufactured:USA, 1954-1956 (Discontinued)
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
FS-1
MS-1
VPS-R9
Matching speaker
Mobile speaker
6/12 VDC power supply