RigPix logo

FlexRadio Systems logo


Back to main

Back to FlexRadio Systems

Next HF and more


Copyright logo


Last modified 2023-03-26

Valid HTML 4.01 Transitional

FlexRadio Systems Flex-6300

A picture of FlexRadio Systems Flex-6300

SPECIFICATIONS

GENERAL
Type:Amateur HF/VHF SDR transceiver
Frequency range: TX: 10-160 m + WARC / 6 m
RX: 0.03-54 MHz
Tuning steps:Down to 1 Hz
Frequency stability:? ppm
Mode:AM / Sync-AM / FM / SSB / CW / RTTY
Channels / memory management: Depending on software
Repeater shift / offset:Depending on software
Power supply:13.8 VDC 15%
Current drain / power consumption:RX: Max 1.7 A
TX: Max 23 A
Antenna impedance / connector:50 ohm / Two SO-239
Dimensions (W*H*D):330*71*300 mm (13*2.8*11.75")
Weight:4.5 Kg (10 lb)
Other features: Panadapter: Max 7 MHz. Transverter port. Two USB ports.
Ethernet port.




RECEIVER SECTION
Receiver system: Direct digital sampling
Sensitivity:
Selectivity:
Image rejection:Better than 80 dB
AF output power / speaker:? W at ?% distortion / ? ohm
External speaker connector:600 ohm stereo




TRANSMITTER SECTION
RF output power: 1-100 W (AM: 1-25 W)
Modulation system:Digital low power at carrier frequency
Max FM deviation (Factory set):FM: 5 KHz
NFM: 2.5 KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:200-10000 ohm / 8-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:20xx-20xx
Additional info:
Related documents:
Modifications and fixes:
Reviews:
Options / Accessories:
-
-
Antenna tuner
Front handle kit
A rear picture of FlexRadio Systems Flex-6300