| GENERAL |
| Type: | HF receiver |
| Frequency range: |
3.4-30 MHz (Fourteen 200 KHz ranges)
XTAL's for the following twelve ranges were installed from factory:
3.4-3.6 MHz
3.6-3.8 MHz
3.8-4.0 MHz
7.0-7.2 MHz
7.2-7.4 MHz
14.0-14.2 MHz
14.2-14.4 MHz
14.8-15.0 MHz
21.0-21.2 MHz
21.2-21.4 MHz
21.4-21.6 MHz
28.5-28.7 MHz
|
| Tuning steps: | Continuous |
| Frequency stability: | Within 100 Hz after warmup (No temperature reference) |
| Mode: | AM / SSB / CW |
| Channels / memory management: |
None
|
| Power supply: | Mains: 115 VAC |
| Current drain / power consumption: | Less than 90 W |
| Antenna impedance / connector: | 50-75 ohm / Phono (RCA) |
| Dimensions (W*H*D): | 375*197*318 mm (14.75*7.75*12.5") |
| Weight: | 9 Kg (20 lb) |
| Other features: | |
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 2.955-3.155 MHz
2nd IF: 455 KHz
|
| Sensitivity: | SSB: 0.5 uV (10 dB S+N/N) |
| Selectivity: |
AM
4.5 KHz (-6 dB)
25 KHz (-60 dB)
SSB
2.1 KHz (-6 dB)
4.2 KHz (-60 dB)
CW
200 Hz (-6 dB)
1.25 KHz (-60 dB)
|
| Image rejection: | 50 dB |
| AF output power / speaker: | 1.8 W at ?% distortion / No internal speaker |
| External speaker connector: | Phono (RCA), 4 ohm |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | USA, 1961-1964 (Discontinued) |
| Additional info: | |
| Related documents: | User manual v4 (6.2 MB) |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
