RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next mobile


SBE logo


Copyright logo


Last modified 2022-01-25

Valid HTML 4.01 Transitional

SBE Sidebander VI

A picture of SBE Sidebander VI

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels / tuning steps:40
Mode:AM / SSB
Frequency control:PLL (NDC40013)
Frequency stability:?%
Clarifier or Delta tune:±? KHz
Power supply:13.8 VDC
Current drain / power consumption:RX: 0.8-1.3 A
TX: Max 3 A
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):197*62*220 mm (7.75*2.44*8.66")
Weight:1.8 Kg (4 lb)
Other features:PA. NB. Dimmer.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne
IF: 7.8 MHz
Sensitivity: AM: 0.7 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Selectivity:AM: 10 KHz (-65 dB)
Image rejection:65 dB
AF output power / speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:




TRANSMITTER SECTION
RF output power:AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation (Factory set):No FM
Spurious emissions:Better than -60 dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Japan, 1978-1979 (Discontinued)
Main PCB:
Sub PCBs:
Additional info:This is a rare transceiver
Related documents: PLL: NDC40013
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -