RigPix logo

CB/Freeband logo

Back to main

Back to CB & "Freeband"

Next base

SBE logo

Copyright logo

Last modified 2021-06-14

Valid HTML 4.01 Transitional

SBE Console VI

A picture of SBE Console VI


Type:Citizen band transceiver
Frequency range:26.965-27.405 MHz
Channels/tuning steps:40
Mode:AM / SSB
Frequency control:PLL (NDC40013)
Frequency stability:?%
Power supply:Mains: 115 or 240 VAC (Depending on market)
or 13.8 VDC
Current drain/power consumption:RX: 1.5-2.5 A @ 13.8 VDC
TX: Max 3.5 A @ 13.8 VDC
Antenna impedance/connector:50 ohm / SO-239
Dimensions (W*H*D):425*125*350 mm (16.73*4.92*13.78")
Weight:8.54 Kg (18.8 lb)
Other features: PA. NB. 12 hr alarm clock and timer. 10 memories and scanning.
Channel 9 button. SWR meter.

Receiver system:Single conversion superheterodyne
IF: 7.8 MHz
Sensitivity: AM: 0.7 uV (10 dB S+N/N)
SSB: 0.25 uV (10 dB S+N/N)
Selectivity:AM: 10 KHz (-65 dB)
Image rejection:65 dB
AF output power/speaker:2.5 W at 10% distortion / 8 ohm
External speaker connector:8 ohm

RF output power: AM: 4 W
SSB: 12 W (PEP)
Modulation system:
Max FM deviation:No FM
Spurious emissions:Better than -60 dB
Microphone impedance/connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV

Manufactured:19xx-19xx (Discontinued)
Main PCB:?
Sub PCBs: 8-67-062 - PLL board
8-67-063 - PSU board
8-67-065 - SWR board
8-67-066 - Clock board
Additional info:Probably less than 1000 were made, so this is a rare one.
Related documents: User manual (10.8 MB)
PLL: NDC40013
AF amplifier: HA1366W
RF final: 2SC1969
Sams Photofact #:None
Modifications and fixes:
- -