RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Robyn logo


Copyright logo


Last modified 2022-02-13

Valid HTML 4.01 Transitional

Robyn T-123B

A picture of Robyn T-123B

SPECIFICATIONS

GENERAL
Type:Citizen band transceiver
Frequency range:26.965-27.255 MHz
Channels / tuning steps:23
Mode:AM
Frequency control:XTAL-matrix
Frequency stability:?%
Clarifier or Delta tune:±1.25 KHz "Fine tune"
Power supply:Mains: 105-120 VAC
or 12-14 VDC
Current drain / power consumption:RX: 6.2 A @ 13.6 VDC
TX: 7 A @ 13.6 VDC
Antenna impedance / connector:50-75 ohm / SO-239
Dimensions (W*H*D):305*127*210 mm (12*5*8.25")
Weight:7.71 Kg (17 lb)
Other features:PA.




RECEIVER SECTION
Receiver system: Double conversion superheterodyne
1st IF: 11.275 MHz
2nd IF: 455 KHz
Sensitivity:0.8 uV (10 dB S+N/N)
Selectivity:6 KHz (-6 db)
Image rejection:75 dB
AF output power / speaker:4 W at ?% distortion / ? ohm
External speaker connector:4-8 ohm




TRANSMITTER SECTION
RF output power:~3.5 W (5 W input)
Modulation system:
FM deviation (Factory set):No FM
Spurious emissions:Better than -55 dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)




MISCELLANEOUS
Manufactured:197x-197x (Discontinued)
Main PCB:
Sub PCBs:
Additional info: Tube transceiver. 6BQ5 (EL84) final.
Also sold as Cardon Spitfire Mark II
Related documents:User manual (1.8 MB)
Sams Photofact #:
Modifications and fixes:
Reviews:
Options / Accessories:
- -