| GENERAL |
| Type: | Citizen band / "Freeband" / Export transceiver |
| Frequency range: |
Export mode
25.615-28.315 MHz
10 m mode
28.765-29.205 MHz
|
| Channels / tuning steps: | 240 (6*40) |
| Mode: | AM / FM / SSB |
| Frequency control: | PLL/CPU |
| Frequency stability: | ?% |
| Clarifier or Delta tune: | ±? KHz |
| Power supply: | Mains: (3-pin IEC C14 connector)
or 13.8 VDC (3-pin connector) |
| Current drain / power consumption: | RX: ? A @ 13.8 VDC
TX: ? A @ 13.8 VDC |
| Antenna impedance / connector: | 50 ohm / SO-239 |
| Dimensions (W*H*D): | 286*121*343 mm (11.25*4.75*13.5") |
| Weight: | 5.44 Kg (12 lb) |
| Other features: |
PA. ANL/NB. Talkback. Roger beep. Echo. Dimmer. +10 KHz button.
SWR meter and SWR alert. Dual cooling fans.
|
|
|
|
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: ? MHz
2nd IF: 455 KHz - Ceramic filter: LT455HTs
|
| Sensitivity: | |
| Selectivity: | |
| Image rejection: | |
| AF output power / speaker: | ? W at ?% distortion / ? ohm |
| External speaker connector: | 3.5 mm |
|
|
|
|
| TRANSMITTER SECTION |
| RF output power: |
| Max power |
|---|
| AM: | 25 W (Carrier / dead key) - 120 W PEP |
| FM (RMS): | 50 W |
| SSB (PEP): | 100 W |
|
| Modulation system: | |
| Max FM deviation (Factory set): | ±? KHz |
| Spurious emissions: | Better than -? dB |
| Microphone impedance / connector: | ? ohm / 4-pin (Metal locking ring connector) |
| Microphone input level: | ? mV |
|
|
|
|
| MISCELLANEOUS |
| Manufactured: | Malaysia, 2024-202x |
| Main PCB: |
EPT990015Z by Ranger
Mainly SMD components
|
| Sub PCBs: | |
| Additional info: |
This radio uses one "RT1" RF driver and two "RT5" RF final MOSFETs.
Question is; are these just sanded down and restamped standard IRF's
or similar? Tsk tsk Ranger for playing that game.
New price, february 2024 in the US: $599.95
|
| Related documents: | |
| Sams Photofact #: | None |
| Modifications and fixes: | |
| Reviews: | |
| Options / Accessories: |
|
