RigPix logo

CB/Freeband logo


Back to main

Back to CB & "Freeband"

Next base


Ranger logo


Copyright logo


Last modified 2022-02-11

Valid HTML 4.01 Transitional

Ranger RCI-2980

A picture of Ranger RCI-2980

SPECIFICATIONS

GENERAL
Type:Citizen band / "Freeband" / Export transceiver
Frequency range:25.615-28.305 MHz
Channels / tuning steps:240 (6*40)
Mode:AM / FM / SSB / CW
Frequency control:PLL (MC145106)
Frequency stability:?%
Clarifier or Delta tune:Coarse: ±? KHz
Fine: ±? Hz
Power supply:Mains
Current drain / power consumption:RX: ? W
TX: ? W
Antenna impedance / connector:50 ohm / SO-239
Dimensions (W*H*D):483*159*305 mm (19*6.25*12")
Weight:10.55 Kg (23.25 lb)
Other features: Roger beep. Dimmer. Echo tone. Variable RF output power.
SWR-meter.




RECEIVER SECTION
Receiver system: Single conversion superheterodyne (SSB)
IF: 10.695 MHz
Double conversion superheterodyne (AM/FM)
1st IF: 10.695 MHz
2nd IF: 455 KHz
Sensitivity: AM/CW: 0.7 uV (10 dB S/N)
FM: 0.5 uV (12 dB SINAD)
SSB: 0.2 uV (10 dB S/N)
Selectivity: AM/FM: 10 KHz (-50 dB)
SSB: 2 KHz (-5 dB), 4 KHz (-60 dB)
Image rejection:>50 dB
AF output power / speaker:3 W at ?% distortion / 8 ohm
External speaker connector:3.5 mm, 8 ohm




TRANSMITTER SECTION
RF output power: AM/FM/CW: 10 W (RMS)
SSB: 25 W (PEP)
Modulation system:
FM deviation (Factory set):±? KHz
Spurious emissions:Better than -? dB
Microphone impedance / connector:? ohm / 4-pin (Metal locking ring connector)
Microphone input level:? mV




MISCELLANEOUS
Manufactured:Taiwan, 199x-200x (Discontinued)
Main PCB:
Sub PCBs:
Additional info:
Related documents:PLL: MC145106
Sams Photofact #:None
Modifications and fixes:
Reviews:
Options / Accessories:
- -